Wednesday, May 27, 2009

Knife Block Re-do!

Since I've got the itch to redecorate, I started in the kitchen. Nothing major so far, but I've updated the merchandising on my counters a bit and I'm much happier with what I've got going on now. (another post on that to come!).

Once I got everything placed where I wanted it on the counters, I knew I had to do something about my knife block. It's pretty necessary - I cook every night, so it gets a lot of use. That said, it has to stay on my counters, but I'm not digging the look of it. There's nothing really wrong with it, but it could be so much better! So out came the paint.

Here is the before:



And, here is the after:



So much cuter, isn't it? It took a couple of steps to get it to this point, but it was still a quick and easy process. Here's how I did it:
1. Sand the entire block to get the old varnish off. Wipe dust off with a damp cloth. Let dry.
2. Once it's dry, paint with a base coat. I used white on mine. Let dry.
3. Once dry, paint with a crackle medium, following the instructions on the can. I used a crackle medium by Behr that I got for around $10 at the Home Depot. Let dry.
4. Paint with a top coat, following the instructions on the crackle medium can. For my top coat, I used an off white/light tan color. Let dry. (are you seeing a trend here?)
5. Apply an antiquing glaze around the edges to give it an aged look (I used American Accents Distressed Ivory Antiquing Top Coat)
6. To get the monogram I used MS Word. I printed out the letter in the size I wanted on regular paper. I then went to a window and put the paper up with the printed size against the glass. Then I used a pencil to trace the image onto the back side of the paper. I then taped the letter onto my block, printed side out and traced around it. This will create a pencil version of the letter on the block. Then, I painted in the letter with craft paint.
7. Apply clear coat to seal it.

Now, I should say that since the knifes will be used on food that you should use paint that is non-toxic. I didn't check that (though I know I should have), but I didn't paint the inside of the knife slots - just the exterior of the block. But still - check just to be safe.

I just love the finished product!









3 comments:

Covered In Crafts said...

So cool! My knife block doesn't have a logo on it but if it did I'd want to cover it too. :)

Unknown said...

great idea, I can't believe I hadn't thought of it myself. I love to decoupage stuff and I'm always searching for flat wood surfaces.

Anonymous said...

What a cute idea, I never even thought of painting mine before. I love the monogram on it.